XCMG XGTC160-I-Crawler-Crane

XCMG XGTC160-I-Crawler-Crane

The XGTC160-I crawler crane represents XCMG’s decades of technical achievements in design and manufacturing. It features simple operation, high flexibility and efficiency, safe operation and excellent economy. It is mainly applied in foundation construction such as wind power auxiliary lifting for rotor tail handling, reinforcement cage hoisting and bridge installation. Its working performance stands out especially under harsh site conditions.

More
Get ln Touch
XCMG XGTC95-Crawler-Crane

XCMG XGTC95-Crawler-Crane

Wide Operating Range & Superior Lifting Performance: The main boom reaches 52m, the longest in its tonnage class. It delivers top-tier lifting performance, surpassing competitors by over 11%. Under the typical wind power lifting working condition (20.5m boom length @ 7m radius), its rated load is 46t, exceeding peer products by more than 21%. Boasting industry-leading performance, it is recognized as the strongest lifting machine within the same tonnage category.

More
Get ln Touch
XCMG XGTC65-Crawler-Crane

XCMG XGTC65-Crawler-Crane

Wide working range & outstanding lifting performance: The main boom reaches 46.5 m, the longest among products of the same tonnage, matching the performance of 80t-class machines in the industry. Adopting cylinder-and-rope luffing telescoping mechanism for higher construction efficiency. Its leading lifting capacity enables performance comparable to 75t-class products under typical high-frequency working conditions.

More
Get ln Touch
XCMG XGTC55-Crawler-Crane

XCMG XGTC55-Crawler-Crane

High Safety & Reliability: Equipped with a 500L large-capacity fuel tank to sustain continuous lifting operations. A high-power independent cooling system ensures the engine and hydraulic system operate under high-load conditions for extended periods without excessive temperature rise. The control system comes standard with virtual wall function, delivering superior intelligence and high safety under extreme working conditions.

More
Get ln Touch
SANY STB300T5-8-Crawler-Crane

SANY STB300T5-8-Crawler-Crane

Equipped with graded load charts for gradient, track gauge and counterweight, it enables travelling with load to satisfy diverse working conditions and deliver high operational efficiency. Low average ground contact pressure (1/3 of that of truck cranes). No steel matting required. Excellent off-road performance, capable of working on soft and muddy ground. Small footprint (1/2 of that of truck cranes). No disassembly or assembly of boom structure needed, allowing flexible maneuvering in confined spaces.

More
Get ln Touch
SANY SCC3200A-9-Crawler-Crane

SANY SCC3200A-9-Crawler-Crane

Full coverage of shield construction, fully satisfying hoisting requirements for domestic shield machines ≤16m; Complete solutions for steel structure and bridge assembly. Millimeter-level inching performance meets high-precision installation demands; Suitable for hoisting of mountain wind turbines below 6MW and wind turbines in the Three-North regions below 4MW; Standard equipped with ground bearing pressure calculation software for advance planning of construction safety.

More
Get ln Touch
SANY SCC1100A-8-Crawler-Crane

SANY SCC1100A-8-Crawler-Crane

Standard equipped with load charts for segmented counterweights, delivering strong adaptability for trestle construction; Standard equipped with iron sheaves for extended boom, featuring excellent wear resistance; Standard equipped with intermediate carrier rollers on track frame for better wear resistance during long-distance travel; Optional free fall hook for wider multi-functional applications.

More
Get ln Touch
SANY SCC550TB-Crawler-Crane

SANY SCC550TB-Crawler-Crane

Extra-long U-type Main Boom: The 5-section U-type main boom reaches a full extension length of 42 m, and the combined full extension of main boom plus jib hits 55 m, taking the leading position in the industry. High-efficiency Electro-hydraulic Control System: Equipped with electro-proportional, constant-power controlled piston pump and electro-proportional multi-way valve system. It delivers precise control, excellent fine movement performance, strong power output, high efficiency and energy saving.

More
Get ln Touch
XCMG Crawler Excavator XE155GA

XCMG Crawler Excavator XE155GA

The XE155GA hydraulic excavator is a brand-new generation product developed by our company after four years of research and development. It combines the advantages of small excavators (flexibility and fuel efficiency) with the high efficiency and productivity of medium excavators.

More
Get ln Touch
XCMG Crawler Excavator XE60G

XCMG Crawler Excavator XE60G

The XE60G hydraulic excavator represents a brand-new generation of products meticulously crafted by our company to meet National IV emission standards. Its custom-engineered domestic engine is precisely matched with a load-sensing hydraulic system.

More
Get ln Touch
XCMG Crawler Excavator XE19U

XCMG Crawler Excavator XE19U

The XE19U is equipped with a high-power engine, with engine power increased to 15.4kW, a 30% increase compared to the 17U, providing strong power, efficient digging, and powerful crushing.

More
Get ln Touch
XCMG Crawler Excavator XE380GK

XCMG Crawler Excavator XE380GK

The XE380GK hydraulic excavator is a new product from our company, distinguished by its high efficiency and low fuel consumption. Incorporating five core technologies, it features a proprietary control system, is equipped with a proven, large-displacement main pump, and is paired with a low-speed, high-torque engine.

More
Get ln Touch
< 123456 >
JRHY

Peter:

E-mail:peter@jrhyauto.com
WhatsApp:  +86-15190256168

Tel:  +86-15190256168

Whatsapp

Whatsapp

WeChat

WeChat

Chloe:

E-mail:chloe@jrhyauto.com
WhatsApp:  +86-15190286168

Tel:  +86-15190286168

Whatsapp

Whatsapp

WeChat

WeChat

MESSAGE

If you have any questions about our products, please leave us a message and we will reply to you as soon as possible.

Submit